Analysis of Curing Machine Maintenance Using Failure Mode and Effects Analysis (FMEA) and Reliability Centered Maintenance (RCM) Methods Case Study of PT. Krismasindo Printing

Ditya Alif Firmansyah; Febrina Agusti; Pitoyo Amrih

doi:10.55927/fjas.v5i7.82

Authors

Ditya Alif Firmansyah Universitas Duta Bangsa Surakarta
Febrina Agusti Universitas Duta Bangsa Surakarta
Pitoyo Amrih Universitas Duta Bangsa Surakarta

DOI:

https://doi.org/10.55927/fjas.v5i7.82

Keywords:

Failure Mode nd Effects Analysis (FMEA), Reliability-Centered Maintenance (RCM), MTBF, MTTR, Preventive Maintenance

Abstract

This study aims to identify critical components and determine a maintenance strategy for curing machines at PT. Krismasindo Printing using the Failure Mode and Effects Analysis (FMEA) and Reliability-Centered Maintenance (RCM) methods. The study was conducted through observation, interviews, and analysis of historical failure data for the period April–June 2026. FMEA was used to prioritize risks based on the Risk Priority Number (RPN), while RCM was used to establish a maintenance strategy. The analysis was supplemented by calculations of Mean Time Between Failure (MTBF), Mean Time to Repair (MTTR), determination of preventive maintenance intervals, and a Fishbone Diagram. The results indicate that bearings, gearboxes, and electric motors are priority components. The resulting maintenance recommendations are expected to improve curing machine reliability and reduce production downtime.

References

Faizzah, M. R., Muti, A. A., Nindia, S., & Haristanti, M. (2025). Enhancing Kiln Reliability in Cement Industry Using RCM II and FMEA. International Journal of Innovation in Mechanical Engineering and Advanced Materials, 7(3), 139–147. https://doi.org/10.22441/ijimeam.v7i3.35085.

Firmansyah, M., & Rizqi, A. W. (2024). G-Tech : Jurnal Teknologi Terapan. 8(4), 2514–2521.

Hidayat, T., Waskitho Haji, Joko Waluto, Nidia Lestari, & Rahayu Khasanah. (2025). Analisis Kerusakan dan Perawatan pada Conveyor Belt Mesin Crusher Tipe 250/400 di Basecamp Independen Nadri dengan Metode RCM dan FMEA. Jurnal Teknologi, 18(1), 94–102. https://doi.org/10.34151/jurtek.v18i1.2181.

Kar, A., & Pal, A. K. (2022). Assessment of effectiveness and utilization of printing machines. 11(4), 243–256. https://doi.org/10.14622/JPMTR-2220.

Qurnaini, K., & Rauf, N. (2026). Evaluasi Komponen Kritis dan Penentuan Strategi Pemeliharaan Berbasis Failure Mode and Effects Analysis ( FMEA ) - Reliability Centered Maintenance ( RCM ) Untuk Mengurangi Downtime Pada Penyulang Cempa. 34–42.

Samharil, F., & Priyana, E. D. (2022). Perancangan Pemeliharaan Mesin Filter Press dengan metode FMECA dan Reliability Centered Maintenance ( RCM ) ( Studi Kasus PT . XYZ ). 8(2), 335–344.

Suroso, H., Lemadi, G., Eko, D., & Prasetio, A. (2026). Analisis Keandalan Mesin Welding Pallet Berbasis Reliability Centered Maintenance ( RCM ) dan FMEA. 4(4), 10956–10962.

Tri Aprianto, Indra Setiawan, H. H. P. (2021). MATRIK Implementasi metode Failure Mode and Effect Analysis pada Industri di Asia – Kajian Literatur. XXI(2). https://doi.org/10.350587/Matrik.

Wibowo, T. J., Hidayatullah, T. S., & Nalhadi, A. (2021). Analisa Perawatan pada Mesin Bubut dengan Pendekatan Reliability Centered Maintenance ( RCM ). 3(2), 110–120.

Wohon, K. G., Purba, A. A., & Endrawati, B. F. (2023). Penjadwalan Perawatan Sparepart Mesin dengan Pendekatan Reliability Centered Maintenance dan Failure Mode Effect Analysis di PT ABC. 13(3), 183–188.